Audio Technica System 10 Pro Dual Wireless Bodypack System

Full Description

2.4GHz Digital System

The Audio Technica System 10 continuously monitors the activity within the 2.4GHz band and automatically adjusts the frequencies to avoid interference.

Three Levels of Diversity

System 10 Pro wireless ensures clear communications by providing three levels of diversity assurance - frequency, time, and space. Frequency Diversity sends the signal on two dynamically allocated frequencies for interference-free communication. Time Diversity sends the signal in multiple time slots to maximise immunity to multi-path interference. Finally, Space Diversity uses two antennas on each transmitter and receiver to maximise signal integrity.

Compact and Expandable

The System 10 Pro comes supplied with a RJ12 cable which allows you to connect up to 5 frames (10 receivers). By combining multiple systems together, this produces a more stable environment in which receivers are coordinated for the reception, transmission and frequency allocation - optimises the simultaneous use of the 10 channels and reducing signal loss.

Features

• 2.4GHz 24-bit/48kHz digital wireless system
• ATW-RC13 rack-mount receiver chassis
• 2 x ATW-RU13 receiver unit
• 2 x ATW-T1001 UniPak® transmitter
• Automatic frequency selection
• 1/4'' (6.3mm) and XLR connectors
• Plug and play - ease of use and exceptionally reliable
• Offers 3 levels of diversity - frequency, time and space - to sure communication without interference
• Rack mountable metal chassis (rack mount kit included)
• Each receiver can be paired with up to 10 transmitters
• Delivers high-fidelity audio quality over the whole frequency band (20Hz to 20kHz)

Specifications

• Operating Frequencies: 2.4GHz ISM Band
• Frequency Response: 20Hz - 20kHz (Depending on Microphone)
• Operating Range: 60m / 200' with No Interfering Signals
• Dynamic Range: >109dB A-Weighted, Typical
• Total Harmonic Distortion:
• Audio Sampling: 24-Bit/48kHz
• Latency: 3.8ms

Receiver

• Receiving System: Diversity (Frequency/Time/Space)
• Output Connectors: RJ45/RJ12 (Microphone)
• Maximum Output Level:
  • Balanced: 0dBV
  • Unbalanced: +6dBV
• Power Supply: 100VAC - 240VAC, 50Hz/60Hz to 12VDC 0.5A (Power Supply Switched Mode External)
• Dimensions: 209.8mm x 44mm x 169.3mm / 8.26'' x 1.73'' x 6.67'' (W x H x D)
• Weight: 940g

Belt Pack

• RF Power Output: 10mW
• Spurious Element: Following Federal and National Regulations
• Input Connector: Four-Pin, Locking Connector
• Battery Type: 2 x 1.5V AA
• Battery Life: >7 Hours Depending on Battery Type & Use Pattern
• Dimensions: 70.2mm x 107mm x 24.9mm / 2.76'' x 4.21'' x 0.98'' (W x H x D)
• Weight: 100g